User Manual Q&AAnswer
Jan 26, 2025 - 10:55 PM
To pair the Furrion FCE48TASH Vision S Camera System with the monitor, please follow these steps:
1. Ensure that both the camera and monitor are turned on and receiving power.
2. Press the MENU button on the right side of the monitor to enter the setup menu.
3. Tap the PAIRING option in the menu to enter pairing mode.
4. On the camera, locate the MONITOR PAIRING button (rear camera shown) and press it to initiate the pairing process.
5. The camera and monitor will attempt to establish a wireless connection. Wait for the pairing process to complete.
6. Once the pairing is successful, the camera's video feed should appear on the monitor screen.
If the camera and monitor are not pairing successfully, please try the following troubleshooting steps:
1. Make sure that the camera is receiving power. Check the power connections and ensure that the fuse on the connected power line provides the required current for the camera.
2. Verify that the camera antenna is securely attached and positioned vertically for optimal signal reception.
3. Check for any interference from other wireless devices or objects that may be obstructing the wireless signal. Move any potential sources of interference away from the camera and monitor.
4. If the pairing process still fails, try resetting both the camera and monitor by turning them off and then back on again.
If you are still experiencing issues with pairing the camera and monitor, it is recommended to contact Furrion customer support for further assistance. They can provide additional troubleshooting steps or arrange for a replacement if necessary.
Add New Comment