User Manual Q&AAnswer
Jan 26, 2025 - 10:53 PM
To install the TORNADO HI-FAN-24HVWM-1P 24 Inches High-Velocity Metal Wall Fan, follow these steps:
1. Ensure that the location and wall surface can handle the weight of the fan (14.6 lbs).
2. The fan must be mounted on a 12-inch (300mm) thick dry and cement-grouted firm wall or on 4 by 5 inch wood studs/joists.
3. Use the wall bracket provided as a template to locate the holes that need to be drilled.
4. After determining the hole locations, use an appropriate sized drill bit and drill holes through the mounting surface.
5. It is recommended to use grade 5 fasteners. The acceptable surfaces for mounting the wall mount assembly are:
- Steel Surface: Drill through holes at pre-marked locations using a 9/32" drill bit. Attach the wall mount assembly to the steel surface using 1/4"-20 hex screws, 1/4" flat washers, 1/4" lock washers, and 1/4"-20 hex nuts.
- Masonry Surface: Use a 1/4" expansion type bolt or 1/4" masonry lag with a shield designed to handle the weight of the fan. Drill holes at pre-marked locations using an appropriate sized drill bit recommended for the fastener.
Please note that these instructions are a general guideline, and it is essential to refer to the instruction manual for specific details and illustrations related to the installation process.
Add New Comment