User Manual Q&AAnswer
Jan 26, 2025 - 10:53 PM
To pair the Furrion Vision S Camera with the monitor, follow these steps:
1. Ensure that both the camera and the monitor are turned on and receiving power.
2. Press the MENU button on the right side of the monitor to enter the setup menu.
3. Tap on the "PAIRING" option to enter pairing mode.
4. On the camera, locate the "MONITOR PAIRING" button (rear camera shown) and press it to initiate the pairing process.
5. The monitor will search for the camera signal and establish a connection. Once the pairing is successful, the camera's video feed will be displayed on the monitor.
6. If you have multiple cameras, repeat the pairing process for each camera by selecting the desired camera in the pairing menu and pressing the "MONITOR PAIRING" button on the camera.
Note: If the camera and monitor are already bundled together, they may be pre-paired and ready to use out of the box. In this case, you can skip the pairing process and the camera's video feed should already be displayed on the monitor.
For more detailed instructions and illustrations, please refer to the Furrion Vision S Camera System user guide.
Add New Comment