User Manual Q&AAnswer
Jan 26, 2025 - 10:30 PM
To use the dimmer function on the Paul Neuhaus 832189 Inigo LED Ceiling Light, please follow the steps below:
1. Turn on the light: Ensure that the light is switched on using the main power switch.
2. Activate the dimmer function: Once the light is on, press and hold the dimmer button on the control panel. The dimmer button is usually labeled with a symbol that resembles a light bulb with an arrow pointing up and down.
3. Adjust the brightness: While holding the dimmer button, the light will start to dim gradually. Continue holding the button until you reach your desired brightness level.
4. Save the brightness level: Once you have achieved the desired brightness, release the dimmer button. The light will save the brightness level, and it will remain at that level until you adjust it again.
Please note that the specific steps may vary slightly depending on the model or version of the Paul Neuhaus 832189 Inigo LED Ceiling Light. For more detailed instructions, refer to the user manual provided by Paul Neuhaus GmbH.
Add New Comment