How do I install the ORTECH SLIM6-3CCT LED Slim Lights? (ORTECH SLIM6-3CCT LED Slim Lights Instruction Manual)

Answer

manuals.plus

Jan 26, 2025 - 10:25 PM

To install the ORTECH SLIM6-3CCT LED Slim Lights, please follow the instructions provided in the manual. Here is a step-by-step guide:

1. Pre-Installation:
- Turn off the power from the electrical panel before starting the installation.
- Choose a suitable position to place the fixture and open the hole according to the cut-hole dimensions mentioned in the Hole Cut Table.
- Run electrical wire from the switch (power supply) through the mounting hole, using NMD90 Romex or BX cable.

2. Driver Wiring:
- Open the driver box swing cover and remove the appropriate knockout(s).
- Insert the electrical supply cable through the knockout and secure it with a cable connector (sold separately).
- Use wire nuts to connect the green ground wire of the cable to the green wire on the box. Connect the white wire of the cable to the white wire of the box. Connect the black wire of the cable to the black wire of the box.
- Place all wiring and connections back into the box and close the cover. Insert the driver box through the mounting hole. For new construction applications, the driver box should be firmly secured to studs, joists, or similar fixed structural units. For remodel applications, the driver box does not need to be firmly secured after the mounting plates, studs, joists, or structural units have been concealed.

3. Fixture Installation:
- Connect the fixture to the driver box by inserting and twisting the male/female connectors.
- Push the spring-loaded clips on the fixture upwards and insert the fixture base into the mounting hole. Release the clips, and the fixture will be pulled flush to the ceiling.
- Once the assembly is complete, turn on the power to confirm that the fixture is working properly.

Please note that these instructions are a general guide, and it is important to consult a qualified electrician for the installation to ensure safety and compliance with local electrical codes.

If you have any further questions or need assistance, you can contact ORTECH at info@ortechindustries.com or visit their website at www.ortechindustries.com. You can also reach their customer support at 1-888-543-6473 or 1-888-541-6474.