User Manual Q&AAnswer
Jan 26, 2025 - 10:13 PM
To install the KLARFIT 10032254 Stronghold Lat Pull Wall, please follow these steps:
1. Start by ensuring that you have all the necessary parts and tools mentioned in the overview section of the manual.
2. Choose a suitable location on your wall to mount the device. Make sure the wall is sturdy enough to support the weight of the equipment and the user.
3. Use the provided M10x60 bolts, nuts, and washers to attach the pulleys (item 5) to the designated positions on the wall. Use four sets of bolts, nuts, and washers for all three pulleys.
4. Secure the pulleys in place using the provided M8x70 tapping screws (item 2). Use four screws to secure each pulley.
5. Attach the spring clips (item 6) to the pulleys. These clips will hold the cables in place during exercise.
6. Connect the gourd buckles (item 7) to the spring clips on the pulleys. These buckles will serve as attachment points for the cables.
7. Slide the hollow sleeves (item 8) onto the ends of the lat pull bar or any other attachments you plan to use with the device.
8. Attach the cables to the gourd buckles and thread them through the pulleys. Make sure the cables are properly aligned and not twisted.
9. Adjust the height of the pulleys and the length of the cables according to your preference and the exercise you plan to perform.
10. Double-check all the connections and make sure everything is securely fastened before using the device.
For more detailed instructions and illustrations, please refer to the user manual provided with the product. You can also scan the QR code mentioned in the manual to access the latest user manual and additional product information.
Add New Comment