User Manual Q&AAnswer
Jan 26, 2025 - 10:09 PM
Installation:
1. Before installation, ensure that the power supply is switched off.
2. Mount the pendant light to the desired location using the provided screws and wall plugs.
3. Connect the pendant light to the power supply using the appropriate electrical connections.
4. Once the pendant light is securely installed, switch on the power supply.
Dimming Function:
1. The Paul Neuhaus 2474-18 Pendant Light is equipped with a dimmer function.
2. To dim the light, turn on the pendant light using the switch.
3. Press and hold the switch until the light starts to dim.
4. Release the switch when the desired brightness is attained.
5. The pendant light will save the brightness level for future use.
Please note that the dimming function is only compatible with dimmable LED-Boards. If the LED-Board is not dimmable, the dimming function will not work.
For any further assistance or troubleshooting, please refer to the instruction manual provided by Paul Neuhaus GmbH.
Add New Comment