User Manual Q&AAnswer
Jan 26, 2025 - 10:07 PM
To install the Fisher Paykel 25397 Dual Install 76+61cm Column Refrigerator Toe Kick, please follow these steps:
1. Ensure that you have the necessary tools for installation, including a screwdriver and measuring tape.
2. Start by removing any existing toe kick or trim from the bottom of the refrigerator.
3. Measure the width of the refrigerator and cut the toe kick to the appropriate size if necessary. The width of the toe kick should match the width of the refrigerator.
4. Position the toe kick at the bottom of the refrigerator, aligning it with the front edges.
5. Use the provided screws to secure the toe kick in place. Make sure to xxxx it into the designated holes or brackets on the refrigerator.
6. Once the toe kick is securely attached, double-check that it is level and aligned with the refrigerator.
7. Clean the toe kick and the surrounding area to remove any dust or debris.
8. Finally, check that the toe kick is firmly attached and does not wobble or move when pressure is applied.
Please note that these instructions are a general guideline and may vary depending on the specific model and design of your Fisher Paykel refrigerator. It is always recommended to refer to the user manual or contact Fisher Paykel's Customer Care Centre for detailed and model-specific installation instructions.
Add New Comment