Answer

Jan 26, 2025 - 10:03 PM
Installation and setup of the Dwyer Tuf Series Ultrasonic Energy Meter can be done following the instructions provided in the manual. Here is a step-by-step guide:
1. Start by selecting the appropriate model of the ultrasonic energy meter based on your requirements.
2. The package should include 2 BSPP pipe fittings, 2 tightening nuts, 2 O-rings, and 1 thermowell with a welding collar.
3. If NPT or BSPT connections are required, choose the appropriate pipe fitting model based on the fitting size (for DN15 to DN40 only).
4. For example, if you have chosen the TUF-150-MD model and need fitting size A, select pipe fitting Model WM-ACC-C01 or WM-ACC-C11.
5. Note that the Series TUF units are factory set for supply line installation. However, they can be modified in the field via a communication protocol if needed.
6. Once you have the necessary components, follow the installation instructions provided in the manual to connect the energy meter to your chiller or boiler.
7. Ensure that the connections are secure and leak-free.
8. After installation, you may need to configure the energy meter settings. Refer to the manual for instructions on how to access and modify the settings.
9. The energy meter features a local parameter display, eliminating the need for additional units. Use the display to monitor and verify the readings.
10. The energy meter also supports seamless data transfer with serial communication output standard. If you require data transfer, refer to the manual for instructions on how to set up the communication protocol.
11. If you have any further questions or need assistance, consult the Dwyer Tuf Series Ultrasonic Energy Meters manual for detailed instructions and troubleshooting tips.
Please note that this answer is a general guide, and it is important to refer to the specific manual provided with the product for accurate and detailed instructions.
Add New Comment