How do I install the Paul Neuhaus 835210 Icicle Pendant Light? (Paul Neuhaus 835210 Icicle Pendant Light User Guide)

Answer

manuals.plus

Jan 26, 2025 - 09:57 PM


To install the Paul Neuhaus 835210 Icicle Pendant Light, please follow the steps below:

1. Ensure that the power supply is turned off before starting the installation process.

2. Identify a suitable location for the pendant light. It should be securely mounted to a ceiling or other structural surface.

3. Remove the packaging and carefully unpack the pendant light, ensuring that all components are present and undamaged.

4. Attach the mounting plate to the ceiling or structural surface using appropriate screws and anchors. Ensure that the mounting plate is level.

5. Connect the electrical wires from the ceiling to the wires of the pendant light. Follow the color-coded instructions in the manual for proper wiring. It is recommended to consult a qualified electrician if you are unsure about the wiring process.

6. Once the wiring is complete, carefully attach the pendant light to the mounting plate. Ensure that it is securely fastened.

7. Insert the appropriate G9 bulbs (14xG9/40W) into the sockets of the pendant light. Make sure to use bulbs with the correct wattage to avoid damage.

8. Turn on the power supply and test the pendant light to ensure it is functioning properly.

Please note that this is a general guide, and it is important to refer to the specific instructions provided in the user manual for the Paul Neuhaus 835210 Icicle Pendant Light.