User Manual Q&AAnswer
Jan 26, 2025 - 08:50 PM
To connect the LINDY 38139 70m Cat.6 HDMI 4K30 and IR HDBaseT Extender with PoC, follow these steps:
1. Ensure that all devices are powered off before starting the installation.
2. Connect an HDMI source device to the Transmitter unit using an HDMI cable.
3. Connect one end of a Cat.6/7 cable to the HDBaseT Out port on the Transmitter and the other end to the HDBaseT In port of the Receiver. It is recommended to use U/UTP or F/UTP solid core installation cables.
4. Use another HDMI cable to connect an HDMI display device to the HDMI output port on the Receiver unit.
5. Plug the DC power supply into either the Transmitter or Receiver and switch it on.
6. Power on the source device and display to complete the installation.
Please note that the LINDY 38139 70m Cat.6 HDMI 4K30 and IR HDBaseT Extender with PoC also supports additional functionality such as RS-232 Serial and Infrared Control. Refer to the manual for more information on these features.
It is important to follow the instructions provided in the manual for proper installation and operation of the extender.
Add New Comment