User Manual Q&AAnswer
Jan 26, 2025 - 08:33 PM
According to the CROSSROPE Wall Mount installation instructions, the recommended mount height is between 50" - 60" above the floor. This height range is suggested to ensure optimal usability and convenience during your workout sessions. However, you can adjust the height based on your personal preference and the available space in your workout area.
When installing the wall mount, it is important to measure and mark the four wall mount holes at the appropriate height and space on your wall. Use a measuring tape to ensure accuracy. Once marked, drill four pilot holes where you have marked.
After drilling the pilot holes, drive a drywall anchor into each hole. Drywall anchors are essential for providing stability and support for the wall mount. Make sure to choose anchors suitable for your wall type.
Next, place the wall mount against the wall and line up the holes on the wall mount with the holes on the wall. Drive a xxxx through each hole, being careful not to over-tighten. Over-tightening can damage the wall or the wall mount.
By following these installation instructions and considering the recommended height, you can securely install the CROSSROPE Wall Mount and enjoy your rope skipping workouts conveniently.
Add New Comment