User Manual Q&AAnswer
Jan 26, 2025 - 08:25 PM
To charge the Hama 201663 PD20-HD Power Pack, follow these steps:
1. Start the charging process by connecting the included USB-C to USB-C cable to the USB-C input on the power pack (IN 5V/3A; 9V/2A) and a suitable USB-C charger. Alternatively, you can also charge the power pack via the micro-USB socket by connecting a micro-USB cable to the micro-USB input (IN 5V/2A; 9V/2A) on the power pack and a suitable USB charger.
2. The charging process will begin automatically and end automatically when the power pack is fully charged.
3. It is recommended to fully charge the power pack once before using it for the first time.
Note: During the charging process, the capacity of the power pack is displayed constantly. Each status LED corresponds to 25% of the capacity. When all four status LEDs light up, the full capacity is available. Press the button on the power pack to switch it on and determine its current capacity. Press the button twice until the status LEDs go out to switch the power pack off.
Important: Do not charge the power pack via your PC or notebook as the charging currents can damage the USB port. Only use suitable charging devices or USB connections to charge the product. Do not overcharge the power pack or allow the battery to completely discharge. Charge regularly (at least quarterly) during periods of prolonged storage.
Please refer to the instruction manual for more detailed information and safety precautions.
Add New Comment