User Manual Q&AAnswer
Jan 26, 2025 - 08:24 PM
Installation instructions for the hidealite 7705424 Sharp Wall and Post are provided in the instruction manual. Here is a step-by-step guide on how to install the product:
1. Before starting the installation, make sure to read the safety instructions in the manual and ensure that the power is turned off.
2. For the Sharp Wall installation, you may require additional accessories such as the Corner bracket and Mounting plate. These accessories are mentioned in the manual and their installation instructions are provided separately.
3. For the Sharp Post installation, no additional accessories are mentioned in the manual.
4. Once you have the necessary accessories (if applicable), proceed with the installation.
5. For the Sharp Wall installation, follow the instructions provided for the Mounting plate and Corner bracket installation. These instructions should be available in the manual.
6. For both the Sharp Wall and Sharp Post installations, ensure that the power is turned off before proceeding.
7. Connect the luminaire to the power supply. The manual mentions that the luminaire should be installed by a licensed electrician and in accordance with local regulations.
8. The factory setting for the hidealite 7705424 Sharp Wall and Post is 4000K and 31W. However, the manual also mentions that the luminaire has replaceable control gear and a non-replaceable light source. It is advisable to consult a professional for any replacements or changes in the settings.
9. For any further questions or clarifications, you can visit the hidealite website mentioned in the manual or contact Elektro Elco AB, the manufacturer, through the provided contact information.
Please note that the above instructions are a general guide based on the information provided in the manual. It is always recommended to refer to the specific instructions and guidelines provided in the manual for accurate and safe installation.
Add New Comment