User Manual Q&AAnswer
Jan 26, 2025 - 08:22 PM
Installation of the TERMA 1593BTU Rolo Towel Brass Heated Towel Rail can be done by following the steps outlined in the instruction manual. Here is a step-by-step guide for installing the water and dual fuel version:
1. Before starting the installation, ensure that the power supply is switched off.
2. Determine the desired location for the towel rail. Make sure it is close to the water supply and power source.
3. Mark the positions for the mounting brackets on the wall. The brackets should be positioned at the same height and level.
4. Drill holes at the marked positions and insert wall plugs.
5. Attach the mounting brackets to the wall using screws provided in the package.
6. Connect the towel rail to the water supply. For the water version, you will need to connect the towel rail to the central heating system or a dedicated water supply. Follow the instructions provided in the manual for the specific connection method.
7. If you have the dual fuel version, connect the towel rail to the power supply. This can be done by either hardwiring the towel rail to the electrical system or using a plug-in option. Again, refer to the manual for detailed instructions on the specific connection method.
8. Once the towel rail is securely mounted and connected to both the water supply and power source, turn on the power supply and check for any leaks or electrical issues.
9. If everything is working properly, you can now use the towel rail. Adjust the temperature settings as per your preference using the controls provided.
Please note that these instructions are a general guide, and it is important to refer to the specific instructions provided in the TERMA 1593BTU Rolo Towel Brass Heated Towel Rail Instruction Manual for accurate and detailed installation steps.
Add New Comment