User Manual Q&AAnswer
Jan 26, 2025 - 08:18 PM
To install the power soak Advanced Wash Insert (AWI), follow these steps:
1. Ensure that the dishwasher is turned off and disconnected from the power source.
2. Remove any existing wash inserts or dividers from the dishwasher.
3. Place the AWI into the dishwasher tank, ensuring that it fits securely and aligns with the rib sections.
4. If desired, insert the flexible tank divider to create separate sections within the dishwasher tank.
5. Check that the flow guides, made of UHMW plastic, are properly inserted into each rib section to create an optimally curved inner tank lining.
6. Once the AWI and any additional dividers are in place, connect the dishwasher back to the power source.
7. Turn on the dishwasher and test the AWI to ensure it is functioning properly.
Please note that the installation process may vary slightly depending on the specific dishwasher model. It is always recommended to refer to the user manual provided with your dishwasher for detailed installation instructions specific to your model
Add New Comment