User Manual Q&AAnswer
Jan 25, 2025 - 09:22 AM
To install the August Smart Lock Pro on your front door, follow these steps:
1. Prepare your existing deadbolt: Use the supplied adhesive strip to hold the keyed side of the lock in place.
2. Remove your existing thumb turn: Unscrew and remove the screws from your existing deadbolt thumb turn. If there is an additional back plate, remove that as well. Be sure to unlock your deadbolt before removing the thumb turn entirely.
3. Prepare the mounting plate: The included mounting plate has two adjustable xxxx -holes that can be repositioned as needed. Remove the screws from the thumbturn and insert them into the front of the mounting plate.
4. Attach the mounting plate: Tighten the screws by hand until the mounting plate is secured against the door.
5. Choose your adapter: Select your adapter from the Compatibility Chart provided. If your lock brand is not in the chart, slide each adapter onto the tailpiece to find the right one. The correct adapter will have the small nub pointing up.
6. Attach the correct adapter: Place the correct adapter onto the tailpiece with the small nub pointing up.
7. Open the wing latches: Pull out both side wing latches to prepare for mounting.
8. Attach the August Smart Lock Pro: Slide the August Smart Lock Pro over the tailpiece and attach it to the mounting plate. Make sure the back of the lock is flush with the door. To secure the August Smart Lock Pro, clamp down both side wing latches to the mounting plate completely.
9. Remove the faceplate: Press down on the August logo located at the bottom of the faceplate. Grab the top of the faceplate and remove it.
10. Remove the battery tab: While holding the batteries in place, remove the plastic battery isolation tab. Make sure that the battery is properly seated in its compartment.
11. Replace the faceplate: Place the faceplate back onto the August Smart Lock Pro, with the August logo at the bottom.
12. Install DoorSense™: DoorSense™ enables your lock to know when the door is open and closed. Follow the instructions provided in the link: http://support.august.com/customer/po...
13. Use the August Home app to complete the setup: Download and install the August Home app. Select "Get Started" from the home screen, or, if already logged in to the app, select "Set Up a Lock" from the main menu.
Add New Comment