How do I set up the August AC-R1 Connect Wi-Fi Bridge? (August AC-R1 Connect Wi-Fi Bridge User Guide)

Answer

manuals.plus

Jan 25, 2025 - 08:13 AM

Sure! Here are the step-by-step instructions to set up the August AC-R1 Connect Wi-Fi Bridge:

1. Plug In: Plug your August Connect into a power outlet within 15 feet of your August Smart Lock for optimal performance and reliability. Wait for the flashing green light on your August Connect. If you don't see the flashing green light, press and hold the button on your August Connect for 3 seconds.

2. Open the August Home App: On your iOS device, open the August Home app.

3. Set Up New Device: In the side menu of the app, tap "Set Up New Device" and choose "Set Up An August Connect".

4. Associate Your Connect: If applicable, choose a lock to associate your Connect with.

5. Plug Connects: When prompted, plug the Connect into an outlet near your door.

6. Follow In-App Instructions: Follow the in-app instructions to complete the setup process. Apple's accessory setup interface will ask you to choose your home Wi-Fi network.

7. Check Signal Levels: Once your Connect has successfully joined your home Wi-Fi network, the August Home app will check the signal levels of your Wi-Fi and Bluetooth connections. If the signal levels are good, you're almost finished.

8. Adjust Location (If Needed): If the signal levels are low, you will be guided through adjusting the location of your Connect to improve its connection.

9. Setup Complete: Your Connect is now set up and ready to use!

Please note that these instructions are a general guide, and it's always recommended to refer to the official user guide or manual for detailed instructions specific to your device. You can find the user guide for the August AC-R1 Connect Wi-Fi Bridge in the provided PDF link.