User Manual Q&AAnswer
Jan 25, 2025 - 05:56 AM
To assemble the Goldair GPPF340 40cm Whisper Quiet Pedestal Fan, please follow these steps:
1. Loosen and remove the height adjustment nut from the top of the inner tube.
2. Place the Base cover onto the pole and replace the height adjustment nut.
3. Connect the pole assembly to the base with the 'L' shaped xxxx provided. Tighten until secure.
4. Slide the Base cover down over the assembly.
5. Take off the guard lock nut from the motor housing.
6. Place the rear guard on the front of the motor housing, ensuring the handle is at the top. Line up the lugs on the front of the motor housing with the holes in the rear guard.
7. xxxx on the guard lock nut tightly to attach the rear guard.
8. Place the fan blade on the motor shaft, ensuring the small locating grooves on the back of the blade are pointed to the rear grill so they engage with the pin in the motor shaft. Secure it by tightening the fan blade nut.
9. Place the front guard and install the plastic ring around the grids. Tighten the xxxx of the plastic to set it in place.
10. Insert the inner tube into the fan control panel and secure it by tightening the large xxxx at the rear.
Once assembled, you can proceed to operate the fan according to the instructions provided in the manual.
Add New Comment