User Manual Q&AAnswer
Jan 25, 2025 - 05:50 AM
To install the DiO 54855 On Off Lighting Module, follow these steps:
1. Disconnect the power supply before starting any work. If you have any doubts about your installation, it is recommended to contact an electrician.
2. The module is compatible with non-dimmable incandescent, halogen, LED, or ECO bulbs.
3. Switch off the power supply.
4. Remove the 230V AC live and neutral wires connected to your light.
5. Connect the module to the power supply by connecting the 230V AC live wire (brown/red) to terminal 'L', and the neutral wire (blue) to terminal 'N' outside the module.
6. Connect the live wire going to the light (brown/red) to terminal 'L' and the neutral wire (blue) to terminal 'N' inside the module.
7. Tighten the screws of the 4 terminals of the module and reconnect the power supply.
Note: It is important to follow these instructions carefully and, if unsure, consult a professional electrician.
For more information and detailed instructions, please refer to the DiO 54855 On Off Lighting Module Instruction Manual.
Add New Comment