How do I install the Fisher Paykel AHD3-RS36A Square Handle Kit on my integrated French door refrigerator freezer? (FISHER & PAYKEL AHD3-RS36A Handle Kit User Guide)

Answer

manuals.plus

Jan 25, 2025 - 05:46 AM


To install the Fisher Paykel AHD3-RS36A Contemporary Square Handle Kit on your integrated French door refrigerator freezer, please follow the steps below:

1. Ensure that you have the necessary tools for installation, including a screwdriver.

2. Start by removing any existing handles or trim from your refrigerator freezer doors.

3. Take the handle kit and position it on the desired location of the refrigerator door. Make sure it is aligned properly and centered.

4. Once the handle kit is in position, use a screwdriver to secure it in place. The kit should come with screws specifically designed for this purpose.

5. Repeat the same process for the other door of the refrigerator freezer.

6. After both handles are securely attached, double-check their alignment and make any necessary adjustments.

7. Once you are satisfied with the installation, test the handles by opening and closing the refrigerator doors to ensure they are functioning properly.

Please note that these instructions are a general guideline, and it is always recommended to refer to the user guide or installation manual provided with the Fisher Paykel AHD3-RS36A Contemporary Square Handle Kit for specific instructions and any additional steps that may be required.

If you encounter any difficulties during the installation process or have any further questions, it is advisable to contact Fisher & Paykel's Customer Care Centre at 1.888.936.7872 for assistance.