User Manual Q&AAnswer
Jan 25, 2025 - 05:42 AM
To connect your TASCAM Series 8p Dyna Microphone Preamp to your audio equipment, follow these steps:
1. Determine the type of input/output connections your audio equipment supports. The TASCAM Series 8p Dyna Microphone Preamp has various input and output options, including XLR/TRS combo jacks, optical connectors, and analog balanced outputs.
2. Connect your microphone or instrument to the appropriate input jacks on the front or back of the preamp. For microphones, use the XLR input jacks. For instruments, use the TRS input jacks. Set the input switches and +48V switches accordingly.
3. If you have other audio equipment, such as keyboards or audio interfaces, connect them to the MIC/LINE INPUT jacks on the back of the preamp using XLR or TRS cables.
4. If you want to output the audio signals to speakers or other devices, use the ANALOG OUT connector or the LINE OUTPUT jacks. Connect them to the corresponding inputs on your audio equipment using balanced cables.
5. If you want to transmit digital audio signals, use the OPTICAL OUT (S/MUX) connectors. Connect them to the OPTICAL IN (S/MUX) connectors on your digital devices using optical cables.
6. If you want to synchronize the sample clock with other devices, use the WORD IN/OUT connectors. Connect the WORD OUT connector of the preamp to the WORD IN connector of the other device using a BNC cable.
7. Make sure to set the sample clock source on the preamp using the sample clock switch. This will determine whether the preamp uses its internal clock or an external clock source.
8. Once all the connections are made, power on the preamp and your audio equipment. Adjust the input gains and other settings as needed.
Please refer to the TASCAM Series 8p Dyna Microphone Preamp Owner's Manual for more detailed instructions and illustrations on making specific connections.
Add New Comment