User Manual Q&AAnswer
Jan 25, 2025 - 05:39 AM
To install the Neomounts WL40S-950BL18 TV Wall Mount on a solid brick or concrete wall, please follow these steps:
1. Remove the VESA plate from the mount.
2. Determine the desired location on the wall for installation and ensure it is suitable for mounting.
3. Use a stud finder to locate any wooden studs in the wall. If there are no wooden studs available, you will need to use appropriate anchors for brick or concrete walls.
4. If installing on a wooden stud, align the wall plate with the stud and use the provided screws to secure it in place.
5. If installing on a solid brick or concrete wall, use appropriate anchors (not included) to secure the wall plate. Follow the anchor manufacturer's instructions for proper installation.
6. Once the wall plate is securely installed, attach the adapter brackets to the back of your TV. Use spacers if necessary to ensure a proper fit.
7. Carefully lift and attach the TV onto the wall plate, ensuring it is securely fastened.
8. Use a bubble level to ensure the TV is properly aligned. Adjust as necessary.
9. Once aligned, tighten all screws on the mount, but be careful not to exert excessive force to avoid damaging the screws or their threads.
10. Run the necessary cables through the cable cover to keep them organized and hidden.
11. Finally, double-check the installation to ensure the TV is securely mounted and the wall plate is properly attached to the wall.
Please note that it is recommended to have at least two people for the installation process to avoid any accidents or injuries. Additionally, if you have any doubts or concerns about the installation, it is advisable to consult with a qualified professional.
Add New Comment