User Manual Q&AAnswer
Jan 25, 2025 - 05:36 AM
To properly fit the Joerns Oxford PHSL-E1A1706 Full Back Sling from a seated position, follow these steps:
1. Raise the client's leg and feed the padded leg piece under and up between the legs. Make sure that the sling is not twisted or creased under the thigh. Repeat this procedure for the other leg.
2. Feed the right leg support through the dignity strap on the left leg support (optional). Cross over the leg straps, pass one leg strap through the other, and attach them to the hoist on the front hooks.
3. Raise the lift to a convenient height and attach the shoulder straps as shown. You can then raise the client to the required height. When seating the client, the hand grip on the back of the sling can be used to ensure a good seated posture.
Golden Tips:
- The client's posture can be altered by adjusting both shoulder straps.
- If in doubt, attach to colored loops.
- Keep shoulder straps at equal lengths.
Please refer to the user manual for additional information and illustrations on fitting the sling from a seated position.
Add New Comment