User Manual Q&AAnswer
Jan 25, 2025 - 05:30 AM
To connect the Rapoo 3300P Plus Wireless Optical Mouse to your computer, please follow these steps:
1. Make sure your computer is turned on and the wireless receiver is plugged into an available USB port.
2. Turn on the mouse by sliding the power switch located on the bottom of the mouse to the "ON" position.
3. The mouse will automatically enter pairing mode and the LED indicator light on the mouse will start blinking.
4. Press the connect button on the wireless receiver. The LED indicator light on the receiver will start blinking.
5. Within 30 seconds, press the left and right buttons on the mouse simultaneously. The LED indicator light on the mouse will stop blinking and remain lit, indicating a successful connection.
6. The mouse is now ready to use. Move the mouse around to ensure it is working properly.
If the mouse does not connect successfully, try the following troubleshooting steps:
1. Make sure the wireless receiver is securely plugged into a USB port on your computer.
2. Ensure that there are no other wireless devices nearby that may interfere with the connection.
3. Replace the batteries in the mouse with new ones.
4. Restart your computer and try the pairing process again.
If you continue to experience issues, please refer to the troubleshooting section in the user guide or visit the Rapoo website for further assistance.
Add New Comment