User Manual Q&AAnswer
Jan 25, 2025 - 05:25 AM
1. Before starting the installation, make sure to wear safety glasses and gloves. Inspect all contents and glass for damage.
2. Check both finished walls for plumb and the threshold for level. This model requires a minimum of 2-3/8" of flat threshold space for installation.
3. Measure "W" and cut the threshold to the same length as "W - 1 9/16".
4. Install U channel-2 by following the provided instructions.
5. Install the rollers and stoppers according to the instructions.
6. Install the Wall Bracket Assembly as per the instructions.
7. Install the Fixed panel using the provided instructions.
8. Install the Top Track Assembly according to the instructions.
9. Install the Wall Bracket Assembly again following the instructions.
10. Install the Bottom guild using the provided instructions.
11. Install the Door Panel according to the instructions.
12. Install the Magnetic strip to the door panel.
13. Determine the position of the C & D parts as specified in the manual.
14. Install U channel-1 following the provided instructions.
15. Install the Anti-Jump Assembly and Handle according to the instructions.
16. Ensure proper sealing by applying a good quality silicone sealant along the wall Jamb (C) and Water seal (B). Allow 24 hours for the silicone to dry before use. Measure "X" and cut the Water seal (B) to the same length as "X".
Please refer to the provided instruction manual for detailed step-by-step instructions and illustrations. It is important to follow all the steps and safety precautions mentioned in the manual for a successful installation.
Add New Comment