User Manual Q&AAnswer
Jan 25, 2025 - 05:01 AM
To connect your NEC VT700 LCD Projector to your computer, follow these steps:
1. Ensure that both the projector and your computer are turned off.
2. Locate the VGA or HDMI port on your computer. The VGA port is typically blue, while the HDMI port is rectangular and labeled "HDMI."
3. Connect one end of the VGA or HDMI cable to the corresponding port on your computer.
4. Locate the VGA or HDMI input port on the back of the projector. It is labeled "Computer In" for VGA or "HDMI" for HDMI.
5. Connect the other end of the cable to the VGA or HDMI input port on the projector.
6. Turn on your computer and the projector.
7. On the projector's remote control, press the "Input" button to select the appropriate input source (Computer In for VGA or HDMI for HDMI).
8. Adjust the projector's focus and zoom if necessary.
For more detailed instructions and troubleshooting tips, please refer to the NEC VT700 LCD Projector user guide .
Add New Comment