User Manual Q&AAnswer
Jan 25, 2025 - 04:53 AM
To connect your Dell S300 DLP Smart Projector to your computer, follow these steps:
1. Ensure that your computer and projector are turned off.
2. Connect one end of the VGA cable (provided with the projector) to the VGA input port on the projector.
3. Connect the other end of the VGA cable to the VGA output port on your computer.
4. If your computer has an HDMI output port and you prefer to use HDMI for the connection, you can use an HDMI cable instead of the VGA cable. Simply connect one end of the HDMI cable to the HDMI input port on the projector and the other end to the HDMI output port on your computer.
5. Once the cable is connected, turn on your computer and projector.
6. On your computer, go to the display settings and select the appropriate display mode for the projector. This may vary depending on your operating system, but typically you can access display settings by right-clicking on the desktop and selecting "Display Settings" or "Screen Resolution."
7. In the display settings, ensure that the projector is recognized as a secondary display and adjust the resolution and orientation settings as desired.
8. If necessary, select the input source on the projector to match the connection you made (VGA or HDMI).
For more detailed instructions and troubleshooting tips, please refer to the Dell S300 DLP Smart Projector User's Guide provided in the link you shared.
Add New Comment