User Manual Q&AAnswer
Jan 25, 2025 - 04:28 AM
To reset your TP-Link PG1200 Powerline Adapter, please follow these steps:
1. Ensure that the powerline adapter is plugged into an electrical outlet.
2. Locate the Pair button on the powerline adapter.
3. Press and hold the Pair button for approximately 6 seconds until all LEDs on the powerline adapter turn off.
4. Release the Pair button.
5. The powerline adapter will now be reset to its factory settings.
Please note that resetting the powerline adapter will remove any custom settings or configurations you have made. After the reset, you will need to set up your powerline network again if necessary.
If you continue to experience issues with your powerline adapter after resetting it, we recommend contacting TP-Link Technical Support for further assistance.
Add New Comment