User Manual Q&AAnswer
Jan 25, 2025 - 04:24 AM
To install the Niles CSF65A Passive Bar System, follow these steps:
1. Cut a rectangular opening in the drywall according to the dimensions provided in the user guide.
2. Install the In-Wall Mounting System below and centered with a wall-mounted flat panel TV.
3. Route the speaker wires and any other necessary cables from the AV receiver or other audio sources to the speaker module locations.
4. Connect the speaker wires to the speaker module terminals, ensuring proper positive and negative polarity.
5. Hang the speaker modules on the In-Wall Mounting System using the "L" shaped brackets provided.
6. Install the Amplifier Module (if applicable) in the In-Wall Mounting System using the same hanging method as the speaker modules.
7. Connect the speaker wires and any other necessary cables to the Amplifier Module.
8. Secure the In-Wall Mounting System by tightening the screws on the xxxx Down Slide Brackets and Clamp Down End Brackets.
9. Install the In Between Covers and Joiners to fill the empty spaces between the speaker and amplifier modules.
10. Attach the magnetically attached Speaker Grille to the In-Wall Mounting System, adjusting it as needed for precise center alignment with the TV.
11. Test the system before completing the installation.
Please refer to the user guide for more detailed instructions and diagrams specific to your model.
Add New Comment