User Manual Q&AAnswer
Jan 25, 2025 - 04:20 AM
To properly install the SUPER BRIGHT LEDS LHBDP2 Series Linear High Bay LED Light, follow these steps:
1. Install suspension hooks: Place suspension hooks (not provided) 22" or 44" apart on the ceiling. Make sure that the mounting hooks can support the weight of the fixture.
2. Hang suspension chains: Hang the suspension chains on the suspension hooks.
3. Attach v-hooks: Insert the v-hooks into the holes on each side of the fixture.
4. Hang the fixture: Hook the suspension chains onto the v-hooks to hang the fixture securely.
5. Make electrical connections: Remove the xxxx from the wire access plate to access the wiring connections. Follow the provided wiring diagram to properly connect the wires.
Important Safety Notes:
- This product should be installed by a certified electrician in accordance with local building and electrical codes.
- Before performing any installation or wiring procedures, ensure that the main power source and circuit breakers are switched off to avoid the risk of electric shock.
- Properly support the fixture during installation to prevent damage or injury. Ensure that the mount is securely attached and can support the weight of the fixture.
For further assistance or clarification, refer to the SUPER BRIGHT LEDS LHBDP2 Series Linear High Bay LED Light instructions manual or contact the manufacturer at 866-590-3533.
Add New Comment