User Manual Q&AAnswer
Jan 25, 2025 - 04:18 AM
To pair the Furrion Vision S camera with the monitor, follow these steps:
1. Ensure that both the camera and monitor are turned on and receiving power.
2. Press the MENU button on the right side of the monitor to enter the setup menu.
3. Tap on the PAIRING option to enter pairing mode.
4. On the camera, locate the MONITOR PAIRING button (rear camera shown) and press it to initiate the pairing process.
5. The monitor will search for the camera and establish a connection. Once paired, the camera's video feed will be displayed on the monitor.
6. If you have multiple cameras, repeat the pairing process for each camera by selecting the camera you want to pair in the PAIRING menu and pressing the MONITOR PAIRING button on the camera.
Note: It's important to ensure that the camera and monitor are within range of each other and that there are no obstructions or interference that may affect the wireless signal. Additionally, make sure that the camera is receiving power and that the monitor is properly connected to a power source.
For more detailed instructions and troubleshooting tips, refer to the Furrion FOS05TASR Vision S Camera System User Guide.
Add New Comment