User Manual Q&AAnswer
Jan 25, 2025 - 04:12 AM
To connect the SONOFF SNZB-02 ZigBee Smart Home Temperature Humidity Finder to the SONOFF ZigBee Bridge, follow these steps:
1. Download the eWeLink app on your smartphone.
2. Pull out the battery insulation sheet from the SNZB-02 device.
3. Make sure you have already connected the SONOFF ZigBee Bridge to your network.
4. Open the eWeLink app and select the Bridge you want to connect.
5. Tap on "Add" to add a sub-device.
6. Long press the reset button on the SNZB-02 device for 5 seconds until the LED indicator flashes three times. This indicates that the device has entered pairing mode.
7. Be patient and wait until the pairing process completes.
Note: If the pairing process fails, try moving the SNZB-02 device closer to the Bridge and attempt pairing again.
For more detailed information and troubleshooting, please refer to the user guide provided with the product.
Add New Comment