User Manual Q&AAnswer
Jan 25, 2025 - 04:10 AM
To install the ELVITA E118423 Exterior Wall Light, please follow the steps outlined in the user manual:
1. Before starting the installation, make sure to switch off the power supply to the area where the light will be installed.
2. Ensure that you have all the necessary tools and accessories required for the installation.
3. For wall-mounted installation, follow these steps:
Step 1: Choose a suitable location on the exterior wall where you want to install the light. Ensure that it is not near any heat sources.
Step 2: Carefully read the instructions provided in the user manual and familiarize yourself with the installation process.
Step 3.1: Attach the mounting bracket to the wall using screws or other appropriate fasteners. Make sure it is securely fixed.
Step 3.2: Connect the power leads of the light fixture to the corresponding wires in the electrical junction box on the wall. Ensure that the connections are secure.
Step 4: Once the light fixture is properly mounted and the electrical connections are secure, switch on the power supply and examine the circuit to ensure everything is functioning correctly.
Important Safety Instructions:
- Always read all instructions provided in the user manual before starting the installation.
- It is recommended to hire a licensed electrician for the installation process.
- Ensure that the power supply is switched off and the light fitting has cooled down before performing any maintenance, cleaning, or changing the light bulb.
- Do not install the light fixture near any heat sources.
- Make sure not to exceed the nominal supply voltage or amperage ratings.
- Before connecting the power, ensure that the power leads and screws are securely fastened.
For further support and service, you can visit the ELVITA website at ELVITA.SE or contact Elon Group AB, the distributor and marketer of Elvita products, at +46(0)10-220 40 00.
Add New Comment