User Manual Q&AAnswer
Jan 25, 2025 - 03:55 AM
To assemble the MaximaVida 80x40x102 cm Metal Locker Cabinet, please follow the installation instructions provided in the manual. Here is a step-by-step guide:
1. Start by gathering all the parts listed in the part list section of the manual to ensure you have everything needed for assembly.
2. Begin by attaching the sides of the locker cabinet to the back panel. Use the provided screws and tighten them securely. Repeat this step for both sides.
3. Next, attach the top panel to the sides and back panel using the screws provided. Ensure that all screws are tightened properly.
4. Now, attach the bottom panel to the sides and back panel using the screws provided. Make sure to tighten the screws securely.
5. Install the doors onto the assembled cabinet. Align the hinges of the doors with the pre-drilled holes on the sides of the cabinet. Insert the hinge pins and secure them in place.
6. Finally, check all the screws and connections to ensure they are tightened properly. Regularly inspect and tighten the screws as needed to maintain the stability of the cabinet.
For more detailed instructions and illustrations, please refer to the installation instruction section of the manual. If you encounter any difficulties during assembly, you can contact MaximaVida directly through the provided contact information for further assistance.
Add New Comment