User Manual Q&AAnswer
Jan 25, 2025 - 03:54 AM
To set up the MiBOXER 5 in 1 LED Controller Zigbee 3.0 + 2.4G, follow these steps:
1. Set up the output mode: Press the "SET" button continuously to switch the output mode. The output mode can be confirmed based on the color of the indicator light.
2. Linking Code Instructions: Power off the controller for 10 seconds and then power it on again, or short press the "SET" button once. Then, short press the "I" button three times within 3 seconds. The lights will blink three times slowly to indicate successful linking.
3. Unlinking Code Instructions: Power off the controller for 10 seconds and then power it on again, or short press the "SET" button once. Then, short press the "I" button five times within 3 seconds. The lights will blink ten times quickly to indicate successful unlinking.
4. Auto Transmitting & Synchronization: The remote control signal can be automatically transmitted from one light to another within a 30m range. Multiple lights can synchronize if they are in the same dynamic mode and linked with the same remote control.
5. Dynamic Mode Table Selection: The remote control allows you to select between two dynamic mode tables. To switch to dynamic mode table 1, while the light is in static mode, short press the "S+" button five times quickly until the blue light flashes three times slowly. To switch to dynamic mode table 2, while the light is in static mode, short press the "S-" button five times quickly until the yellow light flashes three times slowly.
6. PWM High Frequency / Low Frequency Switching: The remote control allows you to switch between high frequency (16KHz) and low frequency (250Hz) PWM. To switch to high frequency, press the "OFF" button once within three seconds and then press the "ON" button five times. To switch to low frequency, press the "ON" button once within three seconds and then press the "OFF" button five times.
7. "Do Not Disturb" Mode: By default, the "Do Not Disturb" mode is activated. To turn on the mode, press the "OFF" button three times within three seconds and then press the "ON" button three times. To turn off the mode, press the "ON" button three times within three seconds and then press the "OFF" button three times.
8. Smartphone App Control: To control the LED controller using a smartphone app, you need to add a Zigbee 3.0 gateway into the "Tuya Smart" app. Follow the instructions provided in the manual for pairing and adding the LED controller to the app.
9. Philips Hue Control: If you want to control the LED controller using the "Philips Hue" app, you need to add the device into the app. Follow the instructions provided in the manual for pairing and configuring the LED controller with the "Philips Hue" app.
10. Alexa and Google Home Voice Control: The LED controller can be controlled using voice commands through Alexa or Google Home. Follow the instructions provided in the manual for pairing and configuring the LED controller with your respective voice assistant.
Please refer to the instruction manual for more detailed information and troubleshooting tips.
Add New Comment