Answer

Jan 25, 2025 - 03:51 AM
To pair the Pacific Ultra Core P6 DP-D6 Plus with the controller using the TT RGB PLUS software, follow these steps:
1. Download and install the TT RGB PLUS software from Thermaltake's official website (https://www.thermaltake.com/downloads). Make sure your operating system is compatible (Windows 10 & Windows 11).
2. Launch the TT RGB PLUS software and navigate to the "CONNECT" or "CONTROLLER" pages.
3. Locate the controller port for the Pacific Ultra Core P6 DP-D6 Plus and click on it. This will make the controller port glow with red lighting to indicate pairing mode.
4. Drag and drop the Pacific Ultra Core P6 DP-D6 Plus onto the controller port to complete the pairing process.
5. Once paired, you can save the controller pairing settings by clicking on the "SAVE" button. If you want to reset the controller pairing, click on the "RESET" button. To rescan the controllers, click on the "RESCAN" button.
Note: The software interface may vary with feature updates, so it's recommended to download the latest software version from Thermaltake's website for the most up-to-date instructions.
For further assistance or more detailed information, refer to the Thermaltake Pacific Ultra Core P6 DP-D6 Plus Instruction Manual available on the official Thermaltake website.
Add New Comment