User Manual Q&AAnswer
Jan 25, 2025 - 03:50 AM
To fill the water tank of the Sunbeam 32610010 steam iron, follow these steps:
1. Make sure the iron is unplugged and turned off, and allow it to cool completely before filling the water tank.
2. Locate the water tank on the iron. It is usually located near the handle or on the side of the iron.
3. Remove the water tank by gently pulling it out of the iron.
4. Hold the water tank under a faucet or use a separate container to fill it with water. Make sure not to exceed the maximum fill line indicated on the tank.
5. Once the tank is filled, carefully reinsert it back into the iron until it clicks into place.
6. Plug in the iron and turn it on. Allow it to heat up for a few minutes until the indicator light or "Ready" indicator shows that it is ready for use.
7. The iron is now ready to produce steam. Press the steam button or lever on the iron to release steam while ironing.
Please refer to the user manual for more detailed instructions and safety precautions regarding filling and using the water tank of the Sunbeam 32610010 steam iron.
Add New Comment