User Manual Q&AAnswer
Jan 25, 2025 - 03:48 AM
To install the LED s light 60408 Wall Luminaire, please follow the instructions provided in the installation guide. Here is a step-by-step guide:
1. Before starting the installation, make sure you have read and understood the safety warnings mentioned in the manual.
2. Disconnect the product from the power source before beginning the installation.
3. Ensure that the product is not damaged or defective. If any part is damaged, replace it immediately.
4. If a non-standard consumer (power) installation is required, it is recommended to have it performed by a qualified technician to reduce the risk of electric shock.
5. Make sure the product is sufficiently ventilated during use. Do not cover the luminaire during operation, as it can generate heat and cause damage.
6. If the luminaire is meant for indoor and/or outdoor use only, it will be mentioned on the product or in the manual.
7. Keep the product out of reach of children and animals.
For further assistance, comments, or suggestions, you can visit the support page at www.shada.nl/nl/contact.
Please note that this answer is based on the information provided in the manual. It is always recommended to refer to the specific installation guide for accurate and detailed instructions.
Add New Comment