User Manual Q&AAnswer
Jan 25, 2025 - 03:26 AM
To connect the Harley Benton c 521934 Duality effect pedal to your electric guitar and amplifier, follow these steps:
1. Connect your electric guitar to the INPUT jack socket on the effect pedal using a standard 1/4" instrument cable.
2. Connect your amplifier to the OUTPUT jack socket on the effect pedal using another standard 1/4" instrument cable.
3. If you have a power adapter (not included), connect it to the DC IN socket on the effect pedal. Make sure the power adapter is suitable for the pedal (item no. 409939) and has a polarity center negative. The power adapter should be plugged into a power outlet.
4. Once everything is connected, you can start using the effect pedal. Use the footswitches for the Delay and Reverb effects to turn them on/off. Use the various rotary controls (TONE, LEVEL, F.B, TIME, DECAY, MIX) to adjust the parameters of the effects.
Please refer to the "Operating elements" section in the user guide for a visual representation of the connections and controls mentioned above.
Note: The Harley Benton c 521934 Duality effect pedal does not support battery operation, so make sure to use a power adapter for proper functionality.
Add New Comment