User Manual Q&AAnswer
Jan 25, 2025 - 03:22 AM
To modify the IP address of the camera, follow these steps:
1. Connect the camera to a computer using a wire.
2. Ensure that the camera is powered on and working properly.
3. Open any browser and enter the IP address "192.168.42.108".
4. Enter the username and password (default is "admin") and confirm.
5. In the password modification interface, click cancel to not modify the password.
6. In the setup interface, click on "Settings" and then "Network Settings" followed by "General Settings".
7. Change the IP address and default gateway from "42" to "1".
8. Click "Save" to apply the changes.
9. The camera's network segment setup is now complete. You can change the network segment settings on your computer to match the normal network segment.
Please note that modifying the IP address should be done carefully, and any changes should be synchronized with the GCS software IP address to ensure proper functionality.
Add New Comment