User Manual Q&AAnswer
Jan 25, 2025 - 03:02 AM
To install the level one CBT40NANO Bluetooth 4.0 Class 1 USB Adapter on your computer, follow these steps:
1. Ensure that your computer is running one of the compatible operating systems: Windows XP/7/8/8.1/10.
2. Insert the CBT40NANO Software CD into your computer's CD/DVD drive.
3. The CD should automatically start the installation process. If it doesn't, navigate to the CD drive in File Explorer and run the setup file manually.
4. Follow the on-screen instructions to complete the installation. Make sure to read and accept any license agreements or prompts that appear.
5. Once the installation is complete, plug the CBT40NANO USB adapter into an available USB port on your computer. It uses a USB Type A male connector.
6. Your computer should recognize the adapter and install the necessary drivers automatically. If prompted, allow the installation to proceed.
7. After the drivers are installed, the adapter should be ready to use. You can now connect to other Bluetooth devices like PDAs, mobile phones, GPS receivers, mice, or other computers.
Note: The CBT40NANO adapter supports Bluetooth version 4.0 (Class 1) and has a working distance of up to 50 meters. It also possesses a unique MAC address. The
Add New Comment