User Manual Q&AAnswer
Jan 25, 2025 - 02:44 AM
To pair the BAZZ BR30 Smart Home Wi-Fi RGB 10W LED Bulb with the app, follow these steps:
1. Make sure the device is powered on and your smartphone and router are as close to each other as possible.
2. Connect your phone to the Wi-Fi router and ensure it has internet access.
3. Open the "Bazz Smart Home" app on your smartphone.
4. On the "Devices" page, tap the "+" icon located on the top right corner.
5. Select the type of device you want to add.
6. Press the ON/OFF button of the light fixture where you installed the bulb slowly three times until the bulb starts flashing rapidly.
7. Choose your Wi-Fi network from the list and enter the correct password.
8. Tap "Confirm" to complete the pairing process.
Note: If you encounter difficulties pairing the device with EZ mode, you can switch to AP mode. Press the ON/OFF button again for 6 seconds until the bulb starts flashing slowly. Then, select the AP mode in the application.
For more detailed information and troubleshooting, you can refer to the user guide provided with the product or visit the BAZZ Smart Home website.
Add New Comment