User Manual Q&AAnswer
Jan 25, 2025 - 02:37 AM
To install the RITTAL VX 8617.630 Partial Mounting Plates in your enclosure, please follow the instructions provided in the instruction manual. Here is a step-by-step guide:
1. Start by ensuring that the enclosure is powered off and disconnected from the power source.
2. Open the enclosure door and locate the desired position for the partial mounting plates.
3. Remove any existing components or accessories from the desired position.
4. Take the VX 8617.630 Partial Mounting Plate and align it with the mounting holes on the enclosure's side panels or frame.
5. Secure the partial mounting plate in place using the appropriate screws or fasteners. Refer to the manual for the recommended size and type of screws.
6. Repeat the process for any additional partial mounting plates you wish to install.
7. Once all the partial mounting plates are securely installed, you can proceed to mount your desired components or accessories onto the plates.
8. Ensure that the components are properly aligned and secured according to their respective installation instructions.
9. Double-check all connections and ensure that everything is properly installed before closing the enclosure door.
10. Finally, reconnect the enclosure to the power source and power it on.
Please note that the specific installation steps may vary depending on the enclosure model and configuration. It is essential to refer to the instruction manual provided with the RITTAL VX 8617.630 Partial Mounting Plates for detailed and accurate installation instructions.
Add New Comment