User Manual Q&AAnswer
Jan 25, 2025 - 02:30 AM
Sure! Here are the step-by-step instructions for assembling the Steamfast SF-520 Fabric Steamer:
1. Start by assembling the Telescopic Pole. The Telescopic Pole is made up of four sections: TOP (SECTION 1), MIDDLE-TOP (SECTION 2), MIDDLE-BOTTOM (SECTION 3), and BOTTOM (SECTION 4).
2. Locate the COUPLING on SECTION 4 of the Telescopic Pole. If the COUPLING has fallen off, slide it back on.
3. Look down inside the Pole Base and locate two guide ridges. Align the two guide grooves on the Telescopic Pole with the guide ridges inside the Pole Base.
4. With the guide grooves aligned, insert SECTION 4 of the Telescopic Pole into the Pole Base. Slide the COUPLING down over the Pole Base and xxxx it clockwise to lock the Telescopic Pole in place.
5. Next, connect the Pole Top. Look at the underside of the Pole Top and locate two guide ridges. Align the Pole Top guide ridges with the guide grooves on SECTION 1 of the Telescopic Pole. Make sure the Steam Nozzle Cradle faces toward the front of the unit.
6. Slide the Pole Top onto SECTION 1 of the Telescopic Pole and press down firmly until it fits securely in place.
That's it! Your Steamfast SF-520 Fabric Steamer is now assembled and ready to use. If you need further assistance, you can refer to the user manual or contact Steamfast Consumer Service for support.
Add New Comment