User Manual Q&AAnswer
Jan 25, 2025 - 02:28 AM
Sure! Here are the step-by-step instructions for assembling the Steamfast SF-407 Fabric Steamer:
1. Start by assembling the Telescopic Pole. The Telescopic Pole consists of four sections: TOP (SECTION 1), MIDDLE-TOP (SECTION 2), MIDDLE-BOTTOM (SECTION 3), and BOTTOM (SECTION 4).
2. Locate the COUPLING on SECTION 4 of the Telescopic Pole. If the COUPLING has fallen off, slide it back on.
3. Look inside the Pole Base and locate two guide ridges. Align the two guide grooves on the Telescopic Pole with the guide ridges inside the Pole Base.
4. With the guide grooves aligned with the guide ridges, insert SECTION 4 of the Telescopic Pole into the Pole Base. Slide the COUPLING down over the Pole Base and xxxx it clockwise to lock the Telescopic Pole in place.
5. Next, connect the Pole Top. Look at the underside of the Pole Top and locate two guide ridges. Align the Pole Top guide ridges with the guide grooves on SECTION 1 of the Telescopic Pole. Make sure the Steam Nozzle Cradle faces toward the front of the unit. Slide the Pole Top onto SECTION 1 of the Telescopic Pole until it fits securely in place.
6. Adjust the length of the Telescopic Pole sections if needed. To do this, release the extension lock below each section by swinging the hinge outward. Extend or retract each section to the desired length, then close the hinge to secure the extension lock.
Once you have assembled the Telescopic Pole, you can proceed with connecting the Hose, attaching the Fabric Brush, and filling the Water Tank. For more detailed instructions, please refer to the Steamfast SF-407 Fabric Steamer User Manual.
Note: Always follow the safety instructions and guidelines provided in the manual to ensure safe and proper usage of the fabric steamer.
Add New Comment