User Manual Q&AAnswer
Jan 25, 2025 - 02:27 AM
To change the color temperature and brightness of the LeuchtenDirekt 996805 FLAT LED Ceiling Light, you have two options: operation via wall switch or operation via remote control.
1. Operation via wall switch:
- Memory function: If you turn off the lamp via the wall switch and turn it on again after more than 3 seconds, the light will light up in the last mode (color temperature and brightness) it was set to.
- Color temperature change: The color temperature can be changed in 3 steps by quickly switching the light on and off several times. The available color temperatures are 2,700 K, 4,000 K, and 5,000 K.
2. Operation via remote control:
- The remote control allows for more precise control over the light settings.
- On/Off: Use the respective buttons to turn the light on or off.
- Brightness adjustment: Press and hold the button to increase or reduce the brightness. The brightness can be adjusted from 10% to 100%.
- Color temperature adjustment: Use the buttons to increase or reduce the color temperature.
- Night light mode: Activate the night light mode, which sets the light to 10% brightness and a color temperature of 2,700 K.
- Memory function: All lights within the infrared range of the remote control will be set to the same color temperature that was last selected with the remote control.
- Timer: Set a timer for the light to turn off automatically after 30 seconds.
- Multiple lights control: The remote control can control an unlimited number of lights within the infrared range.
For further assistance or inquiries, you can contact LeuchtenDirekt GmbH's customer service at +49(0)2922 9721 9290 or via email at Kundenservice@neuhaus-group.de. You can also visit their website at www.leuchtendirekt.de for more information.
Add New Comment