User Manual Q&AAnswer
Jan 25, 2025 - 02:26 AM
To connect the Laney LA-STUDIO amplifier to your audio interface or PA system using the XLR balanced output, follow these steps:
1. Make sure your audio interface or PA system has an XLR input.
2. Use a good quality XLR cable to connect the XLR balanced output on the rear panel of the LA-STUDIO amplifier to the XLR input on your audio interface or PA system.
3. Set up the LA-STUDIO amplifier the way you intend to play, including adjusting the EQ and volume settings.
4. Adjust the output level of the balanced out using the LEVEL control on the rear panel of the LA-STUDIO amplifier. This will control the signal level sent to your audio interface or PA system.
5. Set the parameters of your audio interface or PA system to achieve your desired sound.
Note: The XLR balanced output on the LA-STUDIO amplifier includes Two notes cabinet emulation, allowing you to capture the amplifier's tone without the need for a physical cabinet or microphone.
Add New Comment