User Manual Q&AAnswer
Jan 25, 2025 - 02:25 AM
To connect and power your PoE devices using the LevelOne GEP-0820W90 8-Port Gigabit PoE Switch, follow these steps:
1. Ensure that the switch is powered off and unplugged from the power source.
2. Connect one end of an Ethernet cable to the LAN port on your network router or modem.
3. Connect the other end of the Ethernet cable to the WAN port on the GEP-0820W90 switch.
4. Connect your PoE devices to any of the 8 PoE ports on the switch using Ethernet cables.
5. Connect the included power adapter to the power input port on the switch.
6. Plug the power adapter into a power outlet.
7. Power on the switch by flipping the power switch located on the back of the device.
8. The switch will automatically detect and provide power to your PoE devices.
Please refer to the "Quick Installation Guide" included in the package for more detailed instructions and illustrations on connecting and powering your PoE devices.
Add New Comment