User Manual Q&AAnswer
Jan 25, 2025 - 02:00 AM
The Fostoria YES-Series Wall/Ceiling Electric Heater requires some assembly and mounting. Here are the step-by-step instructions for installation:
1. Assemble the hanger to the heater. No tools are required for this step.
2. Secure the wall/ceiling mounting bracket to a suitable surface that can support a minimum weight of 100 lbs continuously. Please note that the necessary screws to mount the bracket are not included, so you will need to use 5/16" bolts and flat washers.
3. Attach the unit to the mounting bracket following the instructions for your chosen mounting option. Make sure to install the rotating stops as shown in the manual.
4. If you are converting an FES unit to a YES unit, you will need to order the Fostoria kit Model WMK-YES (part number 04804102).
Please refer to the manual for detailed diagrams and illustrations of the installation process. It is important to follow all safety instructions and ensure that the installation is done by a licensed electrician if required by local electrical codes.
Add New Comment